Key Features
- The CSI-HRR3 is manufactured from FAA inspected components; the HRR3 fully complies with Chapter Five of the FAA Aircraft Material Fire Test Handbook
- The HRR3 determines the heat release rate for qualification of interior aircraft materials as specified by the Federal Aviation Administration when exposed to a radiant heat flux of 35 kW/m²
- Test standards: FAA Chapter 5, FAR 25.853 Appendix F – Part IV, ASTM E906, Boeing BSS 7322, Douglas DMS 2277, Airbus AITM 2.0006
About the CSI-HRR3 (OSU) Heat Release Rate Tester
The CSI-HRR3 (OSU) from CSI, USA, is manufactured from FAA inspected components and fully complies with Chapter Five of the FAA Aircraft Material Fire Test Handbook.
The HRR3 determines the heat release rate for qualification of interior aircraft materials, as specified by the Federal Aviation Administration, when exposed to a radiant heat flux of 35 kW/m². The test standards it follows are listed alongside.
CSI-HRR3 specifications
| Model | CSI-HRR3 (OSU) |
|---|---|
| Manufacturer | CSI, USA |
| Purpose | Heat release rate for qualification of interior aircraft materials, as specified by the Federal Aviation Administration |
| Radiant heat flux | 35 kW/m² |
| Construction | Manufactured from FAA inspected components |
| Compliance | Fully complies with Chapter Five of the FAA Aircraft Material Fire Test Handbook |
| Test standards | FAA Chapter 5, FAR 25.853 Appendix F – Part IV, ASTM E906, Boeing BSS 7322, Douglas DMS 2277, Airbus AITM 2.0006 |
Specifications are as published by the manufacturer, CSI. Download the product brochure or contact us to confirm the configuration for your laboratory.
Heat release rate tester: frequently asked questions
What does the CSI-HRR3 heat release rate tester determine?
It determines the heat release rate for qualification of interior aircraft materials, as specified by the Federal Aviation Administration, when exposed to a radiant heat flux of 35 kW/m².
Does the CSI-HRR3 comply with FAA requirements?
Yes. It is manufactured from FAA inspected components and fully complies with Chapter Five of the FAA Aircraft Material Fire Test Handbook.
Which test standards does the CSI-HRR3 follow?
FAA Chapter 5, FAR 25.853 Appendix F – Part IV, ASTM E906, Boeing BSS 7322, Douglas DMS 2277 and Airbus AITM 2.0006.
What radiant heat flux is used?
Materials are exposed to a radiant heat flux of 35 kW/m². A brochure is available from the button at the top of this page.
Where can I buy the CSI-HRR3 heat release rate tester in India?
Multiflo Instruments, based in Navi Mumbai, supplies CSI testing instruments in India. Our team can advise on the CSI-HRR3, send a quotation, and arrange installation, training, calibration and after-sales service. Use the Contact Us button or call +91-22-44516175.
Related fire and flammability test equipment
Cone Calorimeter
FT Solutions CC-5660, heat release and smoke to ISO 5660 and ASTM E1354
Large Scale Calorimeter
FT-LSC-608 real-scale heat release up to 10–30 MW
NBS Smoke Chamber
ISO 5659-2 and BS 6401 smoke density
Limiting Oxygen Index
ASTM D2863 and ISO 4589 oxygen index
Flammability Chambers
CSI-27UL, CSI-26 and CSI-42 for UL 94 and other burning tests
Bomb Calorimeter
DDS Calorimeters CAL3K, automatic oxygen filling and no water required
Get A Free Instrument Consultation!
We can suggest products to our customers to make them the leaders in their respective industries.